VBrick Systems VBRICK APPLIANCE VB6000 - Manual (Page 90)

80 © 2008 VBrick Systems, Inc.
Configuration: System > Security
21 The 2.5 volts power supply failed.
22 The 2.5 volts power supply failure has cleared.
23 There is a Real Time Clock battery failure.
24 The unit has been configured to transmit and/or receive video streams beyond
its capability.
25 Signifies the overloaded unit is recovered to normal.
26 A component on the main board failed Power On Self Test (POST).
27 The encoder card in Slot1 failed Power On Self Test (POST).
28 The encoder card in Slot1 failed Power On Self Test (POST).
Note If you disable Telnet, FTP, IWS, and SNMP, the only way to manage (and re-enable)
these parameters is to connect a PC to the VBrick with a serial cable and use the
Command Line Interface (CLI). You should never disable all the network management
interfaces if you are using COM2 for serial passthrough.
External Telnet
Server Default = Enabled. Disabled will prevent Telnet sessions to the
server.
External FTP Server Default = Enabled. Disabled will prevent FTP sessions to the server
including downloading to the VBrick. Note that this feature must be
enabled to upgrade the appliance firmware using VBDownload.
Number Event Description