VIEWSONIC VPC100 - Manual (Page 19)

ViewSonic VPC100 8
Installation
Tilting the Screen
After installing the stand, the screen can be tilted about 20 o
to suit the user’s preference.
A
B
Removing the Stand
Should there be a need to detach the stand (i.e., for wall mounting), follow the steps
below:
1. Lay the All-in-One PC on flat and stable surface. Use a soft cloth to protect
the display screen.
2. Release screw located on bottom of stand (A).
3. Pull the stand out (B).
Attaching the Stand
1. Lay the All-in-One PC on a flat and stable surface. Use a soft cloth to protect
the display screen.
2. Attach the stand. Tighten the stand until it is firmly locked in place.
3.
Tighten the screw on the bottom of the stand.
5 o front and 15 o back