VIEWSONIC VPC100 - Manual (Page 20)

ViewSonic VPC100 9
Installation
Connecting PS/2 ® Devices
You can connect a keyboard and a mouse using the PS/2 ® ports on the rear of your
All-in-One PC. Before making any connections, ensure that the All-in-One PC is
turned off.
Connecting a PS/2 ® Keyboard
Plug the keyboard’s PS/2 ® cable into the
purple PS/2 ® port of the All-in-One PC.
Connecting a PS/2 ® Mouse
Plug the mouse’s PS/2 ® cable into the
green PS/2 ® port of the All-in-One PC.
NOTE
• The PS/2 devices should be connected
when the unit is powered off. This will allow
Windows to detect the devices once the
system is turned on.
• You can also connect a USB keyboard or
mouse using the USB ports.