Velleman HAA2801 - Manual (Page 6)

THE SPLIT-DECODED CONTROLLER UNIT (Figure 1)
THE MAIN CIRCUIT BOARD OF THE CONTROLLER --- (Figure 2)
NOTE: Factory suggest that the work of timer adjustment and change of jumper settings on the
main circuit board are to be done by the Installer only.No adjustment/setting change is required for
Split-decoded operation with the ex-factory settings.
6
LINK-UP
JUMPER
OFF-->ON--
>OFF
CODE
LEARNING
BUTTON
(HAA2800 ONLY)
REMOTE
CONTROL
SIGNAL &
STATUS
(HAA2800 ONLY)
INTERNAL
SIREN
& DOOR CHIME
CONNECTION
TERMINALS
MAINS
OUTPUT BEEP
JUMPER ON OR
OFF
FUNCTION MODE
JUMPER
1. SPLIT-DECODED
2. STAND ALONE
MODE 1
3. STAND ALONE
MODE 2
ADJUSTABLE TIMER
FOR OUTPUT 1
TURN CLOCKWISE
FOR MAXIMUM TIME
RECEIVER FOR
REMOTE CONTROL
(HAA2800 ONLY)