Asus ASMB3 - Manual (Page 19)

ASUS ASMB3-SOL 2-5
2.3 Firmware update
You need to update the Broadcom ® IPMI and ASMB3-SOL firmware before you
start using the ASMB3-SOL board.
2.3.1 Broadcom ® 5721 LAN firmware update
To update the firmware:
1. Insert the support CD into the optical drive.
2. Restart the remote server, then press <Del> during POST to enter the BIOS
setup.
3. Go to Boot menu and set the Boot Device Priority item to [CD-ROM].
4. When finished, press <F10> to save your changes and exit the BIOS setup.
5. On reboot, the main menu appears. Type <c> (Broadcom IPMI Firmware
Update).
6. A screen appears, showing the current (if any) firmware version, and the new
firmware version. The screen also displays a confirmation message asking
whether or not you want to update the firmware appears. Press <Y> to
update.
MB: KFN4-DRE
a) FreeDOS command prompt
b) Broadcom ASF Firmware Update
c) Broadcom IPMI Firmware Update
d) ASMB3-SOL Firmware Update
Please choose a to d:
started logfile ’C:fwver.log
none
none
Current BroadCom ASF/IPMI firmware revision : none
New BroadCom ASF/IPMI firmware revision : ASFIPMI v6.09
Update the IPMI firmware ?(y/n) _
The firmware updating process starts.
********************************************************************
Copyright(c) 2000-2005 Broadcom Corporation
Broadcom NetXtreme User Diagnostics 8.30 (18/21/05)
********************************************************************
C Brd:Rv Bus PCI Spd Base Irq EEP MAC Fmw Configuration
- ------ --- --- --- ---- --- --- --- --- ------------
0 5721:C1 02:00:0 Ex1 250 CFCF 5 128k 00E018042100 5721-v3.49a W,auto
1 5721:C1 04:00:0 Ex1 250 CFCF 9 128k 00E018042101 5721-v3.55a W,auto
0 5721:C1 02:00:0 Ex1 250 CFCF 5 128k 00E018042100 5721-v3.49a W,auto
Programming... 131072
OK