Asus ASMB3 - Manual (Page 26)

2-12 Chapter 2: Installation
4. Press <Esc>, then select IPMI Configuration sub-menu from the Server
menu.
5. Use this sub-menu to adjust the remote server LAN settings or view the
System Event Log (SEL).
6. When finished, press <F10> to save your changes and exit the BIOS setup.
2.4.2 Phoenix BIOS setup
Console Redirection setup
To adjust the Console Redirection settings:
1. Restart the remote server, then press <Del> during POST to access the
BIOS setup.
2. Go to the Server menu, select the Console Redirection sub-menu, then press
<Enter>.
3. Set the following sub-menu items:
• Com Port Address to [On-board COM B] or [On-board COM2 port]
• Baudrate to [57.6K]
• Console Type to [VT-UTF8]
• Flow Control to [None]
• Console connection to [Direct]
• Continue C.R. after POST to [On]
• # of Pages to Support to [1]
F1 Help ↑↓ Select Item -/+ Change Values F9 Setup Defaults
ESC: Exit →← Select Menu Enter Select Sub-menu F10 Save and Exit
Item Specific Help
If enabled, it will use a
port on the motherboard.
Console Redirection
Com Port Address [On-board COM B]
Baud Rate [57.6K]
Console Type [VT-UTF8]
Flow Control [None]
Console Redirection [Direct]
Continue C.R. after POST [On]
# of video pages to support [1]
PhoenixBIOS Setup Utility
Main Advanced Server Security Boot Exit