Alpha Technologies Cordex Controller Ver.2.0 - Manual (Page 82)

Refer to the back of this manual for Factory Service and Technical Support contact information
Alpha Technologies Ltd. 034-136-C0 Rev B WC
Printed in Canada. © 2010 Alpha Technologies Ltd. ALPHA and CORDEX are trademarks of Alpha Technologies Ltd. All Rights Reserved. Page 80 of 122
6.8 Communications
This menu category consists of rectifier and power system communications controls. Parameters can be
set/accessed such as the web interface (e.g. IP address), and baud rates.
For a more detailed explanation, refer to the next chapters of the CXC Communications Menu Parameters and
Remote Communications.
6.8.1 Port Status (Web Interface Only)
This page displays the status of the Cordex controller ports; active or inactive for each of the following, shown
below:
Figure 82–Port Status and IP Information window
6.8.2 IP Information
This is where the CXC’s factory unit default values are displayed. Scroll bars enable the user to navigate the list
of text items for viewing; i.e., IP address, Subnet Mask, Gateway and Ethernet/MAC Address.
6.8.3 IP Address (“Ethernet” per web interface)
This menu item enables the Supervisor to program the web interface parameters, see Figure 83 below:
Figure 83–IP Address window
Accept changes and
return to previous screen
Toggle the check box to select
Discard changes and
return to previous screen
Sliders and scroll bars
are used for navigation
Tap on the number to edit
via a virtual numeric keypad