CHIEF KWT110 - Manual (Page 12)

KWT-110 Installation Instructions
12
Figure 12
Mounting CPU to Wall
CAUTION: Overtightening screws may cause wall bracket
to compress into soft wall surface resulting in difficult mount
installation.
1. Ensure bracket flag is in the open position. (See Figure 2)
2. Insert mounting buttons into the four large mounting holes
on the bracket. (See Figure 13)
Figure 13
3. Move flag to closed position in order to fully secure mount
to bracket. (See Figure 14)
Figure 14
WALL TRACK INSTALLATION
1. Determine mounting location on wall.
2. Determine whether wall track accessory will be mounted
horizontally or vertically.
WARNING: The KSA-1022 wall track accessory CANNOT
be installed horizontally on drywall without wood or steel
studs.
Vertical Installation using Wood Studs
1. Using a stud finder or similar method locate stud.
2. Align the middle mounting holes on mount with stud making
sure mounting holes are centered on stud. (See Figure 15)
3. Using wall track accessory (A) as a template, mark location
of three mounting holes on wall. (See Figure 15)
Figure 15
Steel Stud
Drywall
Anchor Metal Channel
Mounting Bracket
(SIDE VIEW)
(X) x 2
12
13
2
Latch closed
3
4
3 X 3
X 3
Mounting holes
centered on stud
(A)