Lectrosonics DM84 - Manual (Page 4)

DM84 Installation Guide
LECTROSONICS, INC. 4
Introduction
The purpose of this guide is to assist in the setup and
operation of a typical DM84 system. This guide as-
sumes familiarity with the DM84 Digital Audio Proces-
sor, its components and software menus and setup
screens. To get the most out of the DM84 system, it is
suggested to review the information presented in the
DM84 Series Reference Manual.
A detailed online Help is also available to assist in the
setup and operation of a DM84 system using the USB
interface and a Windows ® XP, Vista or 7 operating sys-
tem. In addition to assistance setting up and operating
the DM84 system, the Help includes a complete listing
of the DM84 Commands. These commands can be
used to setup and operate the DM84 system via exter-
nal devices using either the USB or RS232 serial port.
Unpacking the Unit
Compare the packing list enclosed with the unit with the
original order. Inspect all items for damage. Immediately
call 1-800-821-1121 to report any items that are miss-
ing or damaged. The sooner we get notified, the sooner
we can get any needed replacement items shipped to
your location.
Items Included in the box:
• Installation Guide Booklet
• Power cable
• 6 each 5-pin de-pluggable connectors
• CAT-5e cables (2 each) 12” with shielded RJ45
connectors
• Lectrosonics screwdriver
• DB9 to TRS (Stereo mini) cable – BLACK - for
laptop setup
• DB9 to TRS (Stereo mini) cable – RED - for touch
panel control systems
• USB cable
• CD-ROM with LecNet2 software and
documentation in Acrobat PDF files
Note: This equipment has been tested and found to comply with the limits for a Class A digital
device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable pro-
tection against harmful interference when the equipment is operated in a commercial environment.
This equipment generates, uses, and can radiate radio frequency energy and, if not installed and
used in accordance with the instruction manual, may cause harmful interference to radio commu-
nications. Operation of this equipment in a residential area is likely to cause harmful interference in
which case the user will be required to correct the interference at his own expense.
Changes or modifications to this equipment that are not expressly approved by Lectrosonics, Inc.
may void the user’s authority to operate it.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two con-
ditions: (1) This device may not cause harmful interference, and (2) this device must accept any
interference received, including interference that may cause undesired operation.