Victory HIA-1D-S7-XH - Manual (Page 22)

F. Door Adjustment Instructions:
Victory has provided a unique self-closing hinge assembly for majority of the cabinets that consist of hinged doors.
Instead of having to deal with complex methods for good door alignment and/or proper door gasket sealing, the
features on the hinge assembly (PN 10685101) makes the task very easy.
When adjustment of the door gasket seal or alignment is desired, fine-tuning can be accomplished with the Adjusting
Plate (pn 50520104). Check the instructions that follow.
1. Open the door between 90
°°
to 180
°°
and lift the door from the hinge brackets (pn 50520103).
2. Slide off the hinge cover(s) (pn 50520105) by grasping and pulling in a downward direction.
3. Replace the door on the hinge brackets and close.
4. Locate the adjusting plate (pn 50520104) inside of the hinge barrel (pn 50520102) of choice. The
hinge barrel is placed on the door itself and attached with at least two screws (pn 50678801).
5. Loosen the screws without taking them completely out.
6. Close door and adjust to the fascia of the cabinet.
7. Slowly push or pull the door until the gasket properly aligns and evenly seals to the cabinet fascia.
8. Tighten screws on the hinge barrel.
9. Place hinge covers.
SECTION 3-OPERATION SECTION 3-OPERATION
18