Victory HIA-1D-S7-XH - Manual (Page 5)

SECTION 1
DESCRIPTION
A. Component Function
1. Doors. Each door has a cylinder lock, recessed handle and self-adjusting magnetic gasket.
a. Door Size. The doors are full length and half length.
*Note: There are only full length doors available for Roll-In and Roll-Thru cabinets.
b. Door Type. The doors are stainless steel.
c. Door Hinges. Cam-lift hinges give the doors their self-closing features.
d. Door Interior Liner is constructed of heavy gauge stainless steel.
2. Heating System. Strip type 750 watt heating elements, operating on 208-240/60/1, having a total of 1500
watts per compartment, are positioned in the cabinet to ensure uniform temperature distribution. Manually
controlled humidity vents are provided in the top of the cabinet.
3. Shelves and Pans.
a. Wire shelves. Heavy-duty wire shelves are adjustable in 1” increments. Shelf clips to support the shelves
are inserted into pilasters on the walls.
b. Pan slides. A wide door opening allows the use of a variety of optional pan slide types for 12” x 20”, 18”
x 26” and 14” x 18” pans and/or trays.
● ● Stainless Steel Adjustable Type Pan Slides as shown in Figure 1-2 are adjustable in increments.
● ● Steel Rod Type Pan Slide Racks, as shown in Figure 1-2, are bottom supported with 2” centers, or
lip supported with 1-1/2” centers.
4. Cabinet. The cabinet ends and interior are made of brushed aluminum. Fronts are made of stainless steel.
Foamed-in-place polyurethane insulation through the cabinet and doors ensures the ultimate in energy
efficiency.
5. Dial Thermometer. The dial thermometer is standard and is calibrated at the factory.
6. Thermometer Sensing Bulb. The temperature sensing bulb is located in the cabinet in the top right hand
corner.
7. Thermostat Control Bulb (Not Shown). The thermal control is accurately calibrated from 70 ° F to 180 ° F
1
SECTION 1-DESCRIPTION SECTION 1-DESCRIPTION