Direct Lift ROTISSERIE - Manual (Page 2)

ROTISSERIE (R3000G) 2 IN50016 Rev. B 03/30/2009
TABLE OF CONTENTS
• IMPORTANT INFORMATION ................................................pg 2
• OWNER / EMPLOYER RESPONSIBILITIES.........................pg 3
• SAFETY PROCEDURES .......................................................pg 3
• GENERAL INFORMATION and FEATURES ........................pg 3
• INSTALLATION / OPERATION PROCEDURE .....................pg 4
• VEHICLE BALANCING OPERATION ...................................pg 7
(Adjusting center of gravity of vehicle)
• ILLUSTRATED PARTS BREAKDOWN.................................pg 9
• PARTS LIST...........................................................................pg 10
IMPORTANT INFORMATION
Any freight damage must be noted on the freight bill before signing and reported to the freight
carrier with a freight claim established. Identify the components and check for shortages. If
shortages are discovered, please contact the Distributor / Sales Rep. in your area for service.
Make sure you have extra help or heavy duty lifting equipment when unloading and assembling
the Rotisserie unit.
Please read the safety procedures and operating instructions in this manual before operating
Rotisserie unit. Keep this manual near Rotisserie unit at all times. Make sure all operators read
this manual.
This is an Auto Body Rotisserie unit installation/operation manual and no attempt is made
or implied herein to instruct the user in specific methods particular to an individual
application. Rather, the contents of this manual are intended as a basis for operation and
maintenance of the Rotisserie unit as it stands alone or as it is intended and anticipated to
be used in conjunction with other equipment.
Proper application of the equipment described herein is limited to the parameters detailed
in the specifications and the uses set forth in the descriptive passages. Any other
proposed application of this equipment should be documented and submitted in writing to
the factory for examination. The user assumes full responsibility for any equipment
damage, personal injury, or alteration of the equipment described in this manual or any
subsequent damages.