Vehicle balancing operation – Direct Lift ROTISSERIE User Manual
Page 7
ROTISSERIE (R3000G)
7
IN50016 Rev. B 03/30/2009
VEHICLE BALANCING OPERATION
(Adjusting the “Center of Gravity” of the Vehicle)
13. CAUTION: This is the most dangerous time during the use of the Auto Body
Rotisserie unit. We have incorporated safety features that prohibit you from turning
the Rotisserie unit while adjusting. This also prevents the unit from slipping while
adjusting.
14. Always start with the Swing arms (upside down “T”) as low as it can be. NOTE: This will
make the vehicle bottom heavy to help prevent causing an accident or personal
injury.
15. Align the Rotation Balancer so the Balance Bolt/Arm fits into the welded cup located on top
of the Pivot Point Base, Fig. 5. NOTE: This is what prevents you from turning while
adjusting.
Rotation Balancer
Balance Bolt/Arm
Pivot Point Base
FIG. 5