Direct Lift ROTISSERIE - Manual (Page 3)

ROTISSERIE (R3000G) 3 IN50016 Rev. B 03/30/2009
OWNER / EMPLOYER RESPONSIBILITIES
The Owner / Employer:
• Shall establish procedures to periodically maintain, inspect, and care for the Rotisserie
unit in accordance with the manufactures recommended procedures to ensure its
continued safe operations.
• Shall provide necessary lockout / tag outs of energy sources per ANSI Z244.1 –1982
before beginning any lift repairs.
• Shall not modify the Rotisserie unit in any manner without prior written consent of the
manufacturer.
• Shall insure that lift operators are instructed in the proper and safe use and operation of
the Rotisserie unit using the manufacturer’s instructions.
SAFETY PROCEDURES
Total Rotisserie unit capacity is 3,000lbs @ 1,500 lbs per end . Do not exceed maximum weight
capacity.
Prior to working with Rotisserie unit, walk around and check for any objects that might interfere
with the operation of unit such as: tools, air hoses, shop equipment, etc.
These are generic instructions, please keep in mind there are different ways to hook up the same
vehicle. Make sure to properly secure and balance vehicles center of gravity before using the
rotisserie.
NOTE: There are no set rules when hooking up a vehicle – just make sure there is a strong
enough mounting point.
GENERAL INFORMATION and FEATURES
The Auto Body Rotisserie is a restoration rotisserie that is designed to make restoring any vehicle
a simple and easy task. The Auto Body Rotisserie uses heavy duty ram jacks at each end with a
slow release mechanism for safe load lowering and also incorporates an extra long power stroke
with hydraulic bypass valves preventing the cylinders from over traveling.
The Auto Body Rotisserie will also lower down to most bumper heights allowing capability to lift
the body of the vehicle to any height.
Whether you’re an owner of a large restoration shop or simply a home hobbyist, the Auto
Body Rotisserie provides an efficient and affordable way for anyone to restore old classic
vehicles.