Jenway Genova Nano German User Manual
Page 12
SECTION 2 – Installation
2.1
UNPACKING
Remove the Genova Plus from the packaging and ensure the following items are included:
1.
Model Genova Plus spectrophotometer fitted with micro-cuvette holder (736 501)
2.
24V 65W power supply unit (021 060)
3.
Pack of 100 disposable UV micro-volume cuvettes 70µl (035 143)
4.
4GB USB memory stick (019 146)
5.
Instruction manual (736 505)
6.
Jenway Foreign Manual CD (JENMANCD)
7.
10x10mm single cuvette holder (630 204)
2.2
INSTALLATION
The Genova Plus is supplied ready to use.
The unit should be placed on a clean flat surface which is free from drafts and vibrations. The units are
designed for operation on 90V to 264V AC input at 47 to 63Hz. Select the correct plug attachment and
attach to the power supply unit as shown below:
Fig 2.2.1 – Power supply unit with various plugs
Connect the power supply unit to the power inlet socket on the rear panel of the instrument and
connect to the mains socket. Turn the power on at the mains and switch the instrument on using the
power switch on the rear of the instrument.
10