Jenway Genova Nano German - Manual (Page 89)

the results that are going to be recorded. Press the key adjacent to the tick icon to confirm selection.
Press the key adjacent to the cross icon to cancel and return to the operating menu.
17.8.2 Selecting Result’s Destination
The autolog menu enables the result’s destination to be
set. To select the internal printer press the key adjacent to
the printer icon. This option is only available if an internal
printer is connected. To select the USB memory stick press
the key adjacent to the USB memory stick icon. This option
is only available if a valid USB memory stick is connected
to the instrument. To send the results to an external
instrument such as a PC or a serial printer press the key
adjacent to the computer icon.
17.9 LOCKED METHODS
The Genova Plus spectrophotometer contains a number of
standard measurement methods that cannot be deleted
from the instrument. These methods are indicated by a
padlock symbol before the method name.
17.10 CONNECTING TO A PC
Connect the interface cable to the RS232 serial port on the rear of the instrument and connect to the
serial port on the PC. The connecting serial port should be configured with the following settings:
9600 baud
8 data bits
No parity
1 stop bit
87