Placing a key in a group, Running a key query – HP Secure Encryption User Manual
Page 24
Configuration 24
4.
Under the section Create Key, complete the following:
o
Key Name: Enter the preferred key name.
The name must consist only of US-ASCII letters, numbers, or the underscore or hyphen characters,
and must be between 8 and 64 characters. The minimum character length is required by the Smart
Array controller, not by the ESKM.
o
Owner Username: Enter the name of the user account to be paired with the key. If creating the
Master Encryption Key, do not assign keys to the deployment user account.
o
Algorithm: Select AES-256.
o
Select the Exportable checkbox. Leave the remaining fields as the default values.
5.
Click Create. You will receive a notification that the key was created successfully.
Placing a key in a group
A key must be assigned a group in order to enable access by HP iLO. To place a key in a group, do the
following:
1.
Run a key query and locate the key created ("
" on page
2.
Assign the key to a group ("
" on page
Running a key query
1.
Log in to the HP ESKM 3.1 ("
" on page
2.
Click the Security tab.