HP Secure Encryption - Manual (Page 35)

Operations 35
IMPORTANT: If this is the first time setting the User password, you must be logged in as the
Crypto Officer.
The User account is disabled by default until the Crypto Officer sets the User account password for the first
time.
To set or change the User account password:
1. Open Encryption Manager (" Opening Encryption Manager " on page 32 ).
2. Log in to the Encryption Manager (" Logging into Encryption Manager " on page 32 ).
3. Under Accounts, locate User Password. Click Set/Change User Password.
4. A new window appears. Enter and re-enter the new password in the New Password fields.
5. Click OK.
Set or change the controller password
A controller password enables all encrypted volumes on the controller to be offline at startup until the
controller password is entered.
The "Set/Change Password" action enables the controller password feature and sets the initial password.
After a password is set, re-executing this action replaces the existing controller password with a new one.
This procedure can only be performed by the Crypto Officer. The controller password cannot be changed
while the controller password feature is suspended or while the controller is locked. However, the controller
password can be removed by the Crypto Officer and later reset.
To set or change the controller password:
1. Open Encryption Manager (" Opening Encryption Manager " on page 32 ).
2. Log in to Encryption Manager (" Logging into Encryption Manager " on page 32 ).