Configuring the controller (remote mode) – HP Secure Encryption User Manual
Page 30
Advertising
Configuration 30
6.
Under Key Manager Configuration, enter the group name created previously in the HP ESKM 3.1 in the
Group field.
7.
Under ESKM Administrator Account, complete the following fields using the deployment username and
password created earlier on the HP ESKM 3.1.
a.
Login Name: Enter the deployment account username.
b.
Password: Enter the deployment account password.
8.
Click Update ESKM. A confirmation screen appears indicating the configuration was saved and
connected successfully.
Configuring the controller (remote mode)
1.
Open Encryption Manager ("
" on page
2.
Click Perform Initial Setup.
A new screen appears.
Advertising