HP Secure Encryption - Manual (Page 39)

Operations 39
3. Under Settings, locate Encrypted Physical Drive Count. Click Drive Key Rekey.
4. A prompt appears, indicating new Drive Encryption Keys will be created for all physical drives. Click
OK to continue.
Rescanning keys
In Remote Mode, this procedure signals the controller to retrieve all encryption keys from the HP ESKM 3.1.
This procedure resolves potentially locked volumes that could have been locked as a result of failure to
initially retrieve the associated keys.
To rescan keys:
1. Open Encryption Manager (" Opening Encryption Manager " on page 32 ).
2. Log in to Encryption Manager (" Logging into Encryption Manager " on page 32 ).
3. Under Utilities, click Rescan Encryption Keys.
4. A new window appears, indicating HP iLO will retrieve keys from the HP ESKM 3.1. Click OK to
continue.
Creating a plaintext volume
IMPORTANT: The controller only allows the creation of new plaintext volumes if it has been
configured to do so by the Crypto Officer. Refer to the Encryption Manager screen to determine
if plaintext volume creation is enabled on the controller.
To create a plaintext volume:
1. Start HP SSA. For more information, see the HP Smart Storage Administrator User Guide.