HP LaserJet P3005 Printer series - Manual (Page 128)

Control panel message Description Recommended action
40 EIO X BAD TRANSMISSION
alternates with
To continue press
A connection with the card in the EIO slot has
broken. ● Press to continue printing.
NOTE Data will be lost.
● If the message persists, contact
HP Support.
40 EMBEDDED I/O BAD TRANSMISSION
alternates with
To continue press
The connection with the HP Jetdirect
embedded print server has broken. ● Press to continue printing.
NOTE Data will be lost.
● If the message persists, contact
HP Support.
Press to continue printing.
41.3 UNEXPECTED SIZE IN TRAY
alternates with
LOAD TRAY X
Media is loaded that is longer or shorter in the
feed direction than the size configured for the
tray. ● Press to print from a different tray.
● To print from the current tray, load the
tray with the size and type indicated.
Ensure that all trays are configured correctly
before printing again. See
Load media for
more information.
41.5 UNEXPECTED TYPE IN TRAY X
alternates with
LOAD TRAY X
The device senses a different media type
than what is configured in the tray. ● Press to print from a different tray.
● To print from the current tray, load the
tray with the size and type indicated.
Ensure that all trays are configured correctly
before printing again. See
Load media for
more information.
41.X ERROR
alternates with
To continue press
A device error has occurred. ● Press to continue or press for
more information.
● If the message persists after exiting
help, turn the device off and then on.
● If the message persists, contact
HP Support.
49.XXXXX ERROR
alternates with
To continue turn off then on
A critical firmware error has occurred. ● Turn the device off and then on.
● If the message persists, contact
HP Support.
50.X FUSER ERROR
For help press
A fuser error has occurred. ● Turn the device off.
● Turn on the device.
● If the message persists, contact
HP Support.
116 Chapter 7 Problem solving ENWW