HP LaserJet P3005 Printer series - Manual (Page 165)

Solve common PostScript problems
The following situations are specific to the PostScript (PS) language and might occur when several
device languages are being used. Check the control-panel display for messages that might help resolve
problems.
NOTE To receive a printed or screen message when PS errors occur, open the Print
Options dialog box and click the selection next to the PS Errors section that you want.
General problems
The job prints in Courier (the device default typeface) instead of the typeface that you requested.
Cause Solution
The requested typeface is not downloaded. Download the font that you want and send the print job again.
Verify the type and location of the font. Download the font to
the device if applicable. Check the software documentation for
more information.
A legal page prints with clipped margins.
Cause Solution
The print job was too complex. You might need to print your job at 600 dpi, reduce the
complexity of the page, or install more memory.
A PS error page prints.
Cause Solution
The print job might not be PS. Make sure that the print job is a PS job. Check to see whether
the software program expected a setup or PS header file to be
sent to the device.
ENWW Solve common PostScript problems 153