HP ESL E-series Tape Libraries - Manual (Page 51)

The status bar at the top of the OCP displays library status at all times, at the left of the bar. The status
can be Online, Going Online, or Offline, followed by a warning level: OK, Warning, or
Critical. In addition, when a library firmware upgrade is in progress, Upgrading FW appears on the
right side of the status bar.
NOTE:
If the library reports a status of Warning or Critical, check the Health Status screen to see which
component is causing that status. See
Viewing library health status information (standalone libraries
only) for details.
NOTE:
For Cross Linked systems, there will be different OCP menu options for the primary and secondary
cabinets in the system. The sections below present information for a standalone library, the primary
cabinet in a Cross Linked system, and the secondary cabinets in a Cross Linked system.
Before using the OCP to perform library functions, familiarize yourself with:
• Home screen
• OCP buttons
Home screen
The first screen the OCP displays after library initialization is the home screen. This screen displays
library status and provides information on the IP address, number of bins, tape drives, ports, and date
(see
Figure 32 , Figure 33 , and Figure 34 ).
Figure 32 Home screen on standalone library
.
HP StorageWorks ESL E-Series Tape Library 51