Viewing and editing setup information, 58 viewing and editing setup information, Health status screen when no errors exist – HP ESL E-series Tape Libraries User Manual
Page 58
2.
If you are performing this task from the primary cabinet of a Cross Linked system, select the
appropriate Cabinet# from the list that appears.
If there are no errors, the following Health Status screen appears (see
).
Figure 39 Health Status screen when no errors exist
.
If there are errors, present, they will be listed on the screen.
3.
When you are finished viewing the error information, press Back to return to the Menu screen.
NOTE:
The Health Status information is not saved. When you exit this screen, the information is
gone.
Viewing partition (Lock Element Addressing) information
NOTE:
Although when Lock Element Addressing is enabled, some OCP screens show this as “Partitioned,”
this is not the same as HP library partitioning.
To view information on the locked elements:
1.
From the Menu screen, use the Up and Down arrows to highlight Partitions, then press Select.
2.
From the Partition screen, which says “hpLibrary,” press the Down arrow once, then press Select.
3.
Use the Back button to return to the home screen.
Viewing and editing setup information
To view or edit the setup information:
1.
From the Menu screen, use the Up and Down arrows to highlight Setup, then press Select.
Library operations
58