LBL Lighting Vera Flush Mount User Manual
Vera ceiling, Install the mounting plate
Installation Instructions for
Vera Ceiling
1.0
980VERAC
Ceiling
FM779_2D
G
P
I
:
ENERAL
RODUCT NFORMATION
This product can mount to either a 4” square electrical box with a
round plaster ring or an octagon electrical box.
This product is suitable for damp locations.
This product can be dimmed with a standard incandescent dimmer.
This instruction shows a typical installation.
1B
2
Remove the mounting plate from the fixture by
unscrewing the two cap nuts from the two threaded
studs.
CAP NUT
THREADED
STUD
MOUNTING
PLATE
FIXTURE
Install the Mounting Plate
2
1
1A
MOUNTING ROD
SHADE
2
Remove the four mounting rods and separate the shade
from the fixture.
1
FIXTURE
CAUTION - RISK OF FIRE
This product must be installed in accordance with
the applicable installation code by a person familiar
with the construction and operation of the product
and the hazards involved.
Use minimum 90°c supply conductors.