Chatsworth Products LCD Monitors - Manual (Page 17)

17
LCD KVM Drawer – KVM Switch Connections
Connect the LCD KVM Drawer to a standalone KVM Switch with a USB or PS/2 keyboard and
mouse connections using the included Combo KVM Cable.
Connection to KVM Switch with USB keyboard and mouse:
Connection to KVM Switch with PS/2 keyboard and mouse:
Notes:
• The connections shown above are only for the LCD KVM Drawer without built-in KVM Switch.
• For the LCD KVM Drawer with built-in KVM Switch, please refer to pages 16 and 17 .
Caution: The LCD KVM Drawer is hot-pluggable, but components of connected
devices, such as the servers and KVM Switch, may not be hot-pluggable. Plugging
and unplugging cables while servers and KVM Switch are powered on may cause
irreversible damage to the servers, KVM Switch and LCD KVM Drawer. Before
attempting to connect anything to the LCD KVM Drawer, we suggest turning off the
power to all devices before connecting them. Apply power to connected devices again
only after the LCD KVM Drawer is receiving power. CPI is not responsible for damage
caused by hot plugging devices.