Chatsworth Products LCD Monitors - Manual (Page 42)

42
How To Clean Your LCD Monitor
Caution:
• To avoid the risk of electric shock, make sure your hands are dry
before unplugging your monitor from or plugging your monitor into an
electrical outlet.
• When you clean your monitor, do not press down on the LCD screen.
Pressing down on the screen can scratch or damage your display.
Pressure damage is not covered under warranty.
• Use only cleansers made specifically for cleaning monitors and
monitor screens. Cleansers not made to clean monitors and monitor
screens can scratch the LCD display or strip off the finish.
• Do not spray any kind of liquid directly onto the screen or case of your
monitor. Spraying liquids directly onto the screen or case can cause
damage which is not covered under warranty.
• Do not use paper towels or abrasive pads to clean your monitor.
Using an abrasive pad or any wood based paper product such as
paper towels can scratch your LCD screen.
Cleaning Your Monitor
To clean your LCD safely, please follow these steps:
1. Disconnect the power cord.
2. Gently wipe the surface using a clean, dry microfiber cloth. Use as little pressure as
possible.
Cleaning Tough Marks and Smudges
To remove tough marks and smudges, please follow these steps:
1. Disconnect the power cord.
2.
Spray a small amount of non-abrasive cleanser on a microfiber cloth.
Caution: Do not spray or apply any liquids directly onto the monitor. Always apply the
solution to your microfiber cloth first, not directly on the parts you are cleaning.
3. Gently wipe the surface. Use as little pressure as possible.
4. Wait until your monitor is completely dry before plugging it in and powering it up.