Chatsworth Products LCD Monitors - Manual (Page 22)

22
Cascade Connection – Expansion LCD KVM Drawer and Switch with Cat5/6 ports
Cascade up to seven additional Analog KVM Switches with Cat 5/6 ports to connect up to 128
or 256 servers through the integrated LCD KVM Drawer, a single remote terminal or IP address.
The Cascade Cable for KVM Switches with Cat5/6 ports (P/N 37208-165) attaches between the
cascade ports on the switches. Equipment is accessed through the consoles on the first switch.
The local, remote and IP connections on cascaded switches are not used.
Note: All switches are accessed through the integrated LCD KVM drawer, remote and IP consoles on the
first switch. The diagram above shows IP KVM Switch P/Ns 37205-421, 37205-422, 37206-421 and
37206-422 which have two IP consoles, as the first switch and P/Ns 37210-220 and 37210-260, which do
not have IP consoles, as expansion switches. You may also use P/Ns 37205-361, 37205-362, 37206-361
and 37206-362, which have one IP console, or either of the expansion switches as the first switch. Since
all expansion switches are accessed through the first switch, be sure to select a switch with the correct
number of IP consoles as the first switch.
Do not mix switches with DB15 and Cat 5/6 ports. These switches have different expansion connections
and use different cascade cables.