Chatsworth Products LCD Monitors - Manual (Page 29)

29
USE – KVM Switch
Password Configuration for the Local/Remote Console
The password is disabled by default.
• Enable password
1. Press the KVM hotkey Scroll Lock + Scroll Lock + U
(you must press hotkey within 2 seconds, you will hear a beep when successful)
2. Logout the KVM by pressing the hotkey Scroll Lock + Scroll Lock + P
(the unit will automatically log out after 10 minutes of inactivity)
3. In SUPERVISOR level, enter “00000000” eight zeros in user name & password field
(Do not use “0” on number pad)
4. In USER level, press Space bar + Enter in user name & password field
• Set your own user name & password
1. Login the KVM in SUPERVISOR level by pressing “00000000” eight zeros in user name
& password field
2. Call KVM OSD menu by pressing the KVM hotkey Scroll Lock + Scroll Lock + Space Bar
3. Press F1 to the MAIN MENU
4. Select “USER SECURITY”
5. Set password in SUPERVISOR & USER level
a. In the left-top row “S” (SUPERVISOR), press Enter to set your own user name &
password
b. In the row 1 to 8 (USER), press Enter to set your own user name & password
6. Press Enter to save the setting or press Esc to cancel the editing without any change
a. Blank has underscore, while SPACE does not
b. Press any alphanumeric key to move to next input item. SPACE is treated as a
valid character
• Change your password
1. Login the KVM in SUPERVISOR level by pressing your own user name & password
2. Call KVM OSD menu by pressing the KVM hotkey Scroll Lock + Scroll Lock + Space Bar
3. Press F1 to the MAIN MENU
4. Select “USER SECURITY”
5. Change password in SUPERVISOR & USER level
a. In the left-top row “S” (SUPERVISOR), press Enter to change your user name &
password
b. In the row 1 to 8 (USER), press Enter to change your user name & password
6. Press Enter to save the setting or press Esc to cancel the editing without any change
a. Blank has underscore, while SPACE does not
b. Press any alphanumeric key to move to next input item. SPACE is treated as a
valid character
• Disable your password
1. Press the KVM hotkey Scroll Lock + Scroll Lock + U
2. Logout the KVM by pressing the KVM hotkey Scroll Lock + Scroll Lock + P
3. You don’t need user name & password to access the KVM OSD menu