Lenovo ThinkVantage (Client Security Solution 8.21) - Manual (Page 19)

Table 7. Options supported by the Fingerprint Software
Parameter Description
CTRLONCE Displays the Control Center only once. The default value
is 0.
CTLCNTR Runs the Control Center on startup. The default value is 1.
DEFFUS • 0 = will not use Fast User Switching (FUS) settings.
• 1 = Will try to use FUS settings.
The default value is 0.
INSTALLDIR Defaults to the fingerprint software installation directory.
OEM • 0 = install support for server passports or server
authentication
• 1 = Only standalone-computer mode with local
passports
PASSPORT Defaults to the passport type set during installation.
• 1 = Default - Local passport
• 2 = Server passport
The default value is 1.
SECURITY • 1 = Install support for the secure mode
• 0 = Do not install; only convenient mode exists
SHORTCUTFOLDER Defaults to the name for the shortcut folder in the Start
menu.
REBOOT Suppresses all reboots including prompts during
installation by setting to Really Suppress.
DEVICEBIO Configures the device type which will be used by the
user. Enrollment Type:
• DEVICEBIO=#3 - device sector will be used before the
first enrollment.
• DEVICEBIO=#0 - enrollment to hard drive will be used
• DEVICEBIO=#1 - enrollment to CompanionChip will
be used
Installing Lenovo Fingerprint Software
The setup32.exe file of the Fingerprint Software program can be installed by using the following procedure:
Silent installation
To silently install the Fingerprint Software, run the setup32.exe file located in the installation directory
on your CD-ROM drive.
Use the following syntax:
setup32.exe /s /v"/qn REBOOT ="R""
To uninstall the software, use the following syntax:
setup32.exe /x /s /v"/qn REBOOT="R""
Options
The following options are supported by the Fingerprint Software:
Chapter 2 . Installation 13