Lenovo ThinkVantage (Client Security Solution 8.21) - Manual (Page 71)

Note: If the setting Power-on Security is not available, create a registry entry as follows to display
this setting:
[HKEY_LOCAL_MACHINE\SOFTWARE\Protector Suite QL\1.0]
REG_DWORD "BiosFeatures" = 2
3. Select the Require fingerprint for computer startup check box, and then click OK to close the window.
4. Click Fingerprints ➙ Enroll or Edit Fingerprints to display the window.
5. Swipe your finger, or enter your Windows password when prompted.
6. Choose one of the registered fingerprints to enable your fingerprint and replace the BIOS passwords.
7. Click Finish to close the window.
ThinkVantage Fingerprint Software (Windows Vista) – for the external fingerprint sensor
1. Click Start ➙ Programs ➙ ThinkVantage ➙ ThinkVantage Fingerprint Software to start the
fingerprint software.
2. Swipe your finger, or enter your Windows password when prompted.
3. Click Settings at the top of the window.
4. Select the Use fingerprint scan instead of power-on and hard drive passwords check box and the
Always show power-on security options check box, and then click OK to close the window.
5. Choose one of the registered fingerprints to enable your fingerprint and replace the BIOS passwords.
6. Click Close to close the window.
Chapter 6 . Best Practices 65