Lenovo ThinkVantage (Client Security Solution 8.21) - Manual (Page 69)

11. Click Start ➙ Programs ➙ ThinkVantage ➙ ThinkVantage Fingerprint Software to start the
enrollment.
12. Click Fingerprints ➙ Enroll or Edit Fingerprints, and then click Next to display the Windows password
window.
13. Enter your Windows password when prompted and then select a finger to enroll.
14. Follow the on-screen prompts to enroll your finger using the external fingerprint sensor in the USB
keyboard.
15. Complete the fingerprint enrollment wizard, and then click Finish to close the wizard.
16. On the ThinkVantage Fingerprint Software window, click Settings ➙ System Settings to display the
ThinkVantage Fingerprint Software Settings window.
17. On the Logon tab, select the Fast User Switching check box.
18. Click OK, and then close the ThinkVantage Fingerprint Software window.
19. Restart the computer and ensure that your fingerprint can be used to log on to Windows with the
internal or external fingerprint sensor.
Scenario 2 – ThinkPad T400 with USB keyboard (attached to domain)
Use the Client Security Solution logon interface (GINA).
1. Install the Lenovo fingerprint software version 3.2.0.275 or later.
2. Install the ThinkVantage fingerprint software version 5.8.2.4824 or later.
3. Install Client Security Solution with version 8.20.0035 or later.
4. Ensure that the USB keyboard is attached to the system.
5. Restart the computer. The fingerprint enrollment wizard automatically starts. If it does not automatically
start, click Start ➙ Programs ➙ ThinkVantage ➙ ThinkVantage Fingerprint Software to start the
enrollment.
6. Enter your Windows password when prompted and then select a finger to enroll.
7. Follow the prompts on the computer screen to enroll your finger using the external fingerprint sensor
in the USB keyboard, and then click Next to display the window.
8. Select the Configure Client Security Solution check box, and then click Finish to close the window.
9. Click Start ➙ Programs ➙ ThinkVantage ➙ Lenovo Fingerprint Software to start the enrollment.
10. Enter your Windows password when prompted and then select a finger to enroll.
11. Follow the prompts on the computer screen to enroll your finger using the internal fingerprint sensor.
12. Click Settings at the top of the window.
13. Clear the Use fingerprint scan instead of password when logging into Windows check box, click
OK, and then click Close to close the window.
14. Restart the computer and log on to Windows with your password.
15. Click Start ➙ Programs ➙ ThinkVantage ➙ Client Security Solution to start CSS.
16. From Advanced menu, select Manage security policies to display the Policy Manager window.
17. In the User Actions panel, select Log on to Windows.
18. In the Security Policy panel, select Use a default security policy for this user action.
19. Click OK, and then click Yes to restart the computer.
20. After restart, ensure that your fingerprint can be used to log on to Windows with the internal or external
fingerprint sensor.
Chapter 6 . Best Practices 63