Lukas DUO Traversing System - Manual (Page 21)

21
Fine adjustment of the distance bars:
Fine adjustment takes place at the other end of the tube. Insert a metal rod (ø8 mm) or
similar tool in the hole in the adjusting pin and unscrew it (turn in anticlockwise direction) until
the required size is reached. For the fine adjustment, the adjusting pin can be unscrewed by
a maximum of 80 mm.
Connecting two roller carriages:
Two distance bars must always be used to connect two roller carriages. These two distance
bars must be set to the same length. They are placed in the retainers in the roller carriages
with the coupling bar on the one side and the adjusting pin on the other.