CCTV Camera Pros Geovision 8.5 Multicam Digital Surveillance System - Manual (Page 100)

82
1.10.2 Setting Hotline Services
When events occur, you can receive notification by a text or voice message through pagers or
telephones.
1. In the Send Alerts Approach Setup dialog box (Figure 1-61), enable Default Alert Approach,
select Hotline and click the Setting button. This dialog box appears.
Figure 1-64
[Modem Setup] Select the dialup modem installed on the computer of the GV-System, and the COM
port that is connected. Click the Detect button to test the connection with the modem.
Note: Internal modems (PCI or ISA) are not recommended.
[Hotline Alert x] The event can be set to trigger up to 3 units of telephones and pagers. A text
message may be sent to the pager.
Enter the telephone number
Enter the text message
Figure 1-65