CCTV Camera Pros Geovision 8.5 Multicam Digital Surveillance System - Manual (Page 423)

Remote Viewing
405
8
8.6.13 System Configuration
Click the Configure button (No. 9, Figure 8-34) to display the following window. At the left panel, select
General Display, Video and Audio or Network to start your configuration.
Figure 8-42 The Configure Window
[General Display]
„ Resolution: Select the Multi View screen resolution. The options available here depend on the
monitor resolution of your PC.
„ Initial Screen: Select screen divisions at startup.
„ Polling Time: Specify the camera polling time from 1 to 60 seconds.
„ Server Status Refresh Time: Specify the frequency to update the host information.
„ Camera Status Refresh Time: Specify the frequency to update the camera information.
„ Active Camera: Select the maximum number of screen divisions allowed on the Multi View.
„ Fast Key: Click the View button to display the fast key table of the Multi View.