5 ip channel setup, 5 ip, Channel setup – CCTV Camera Pros Geovision 8.5 Multicam Digital Surveillance System User Manual
Page 130
112
2.5 IP Channel Setup
There are many ways to set up IP cameras in the system and the setup procedures may vary slightly
among IP camera, video server and compact DVR. Click the Configure button (No. 14, Figure 1-2),
select System Configure, select Camera Install and click IP Camera Install. This dialog box
appears.
Figure 2-1
z
To automatically set up an IP camera, click Scan Camera to detect any IP cameras on the same
LAN.
z
To manually set up an IP camera, click Add Camera.
z
To import IP cameras from the GV-IP Device Utility, click Import Camera.
z
To map IP devices through the GV IP Device Utility, click IP Device Utility.
z
To add all IP cameras within an IP address range, click Automatic Setup.
To see more details on importing and mapping cameras using GV-IP Device Utility, refer to Camera
Mapping Using GV-IP Device Utility later in this chapter. For the other methods, refer to the sections
below.