Lenze HMI for visualisation / with control technology - Manual (Page 59)

Operation
Creating a PLC sample program
Create PLC program
8
l
59 LDCDS−EL100 EN 9.0
12. Enter the following code in the lower half of the divided "PLC_PRG (PRG−ST)"
programming window: Count:=Count+1
Our PLC program is now complete and can be saved.
13. Go to the menu bar, open the menu File and select the menu item Save as.
14. Enter an optional program name (e.g. "example project") in the "Save as" dialogue,
select a memory location and click Save.
After this, we will transfer the program to the HMI. Before doing so, a sym file must be
created.