Metrohm IC Net 2.3 - Manual (Page 54)

5 Interfaces
IC Net 2.3 44
Measuring per second Number of data points measured per s.
Entry range: 10, 20, 30, 50, 60 points/s
Range Range for AD converter.
Example: converts
± 2500 mV to 2 24 bits
Entry range:
2500, 1250, 625, 312.5, 156.25,
78.125, 39.062 mV
Second press on RUN/STOP means 'stop' when measuring
If this option is enabled, the running data
acquisition will be stopped if the RUN/STOP
button on the 762 IC Interface front panel is
pressed. This is equal to
Stop determination
.
If this option is disabled, the running data
acquisition will not be stopped if the
RUN/STOP button on the 762 IC Interface
front panel is pressed.
<ASK> Read current parameters from 762 IC Inter-
face.
<SET> Send current parameters to 762 IC Inter-
face.
RS settings
The RS settings tab of the 762 IC Interface window contains RS232
parameters for the 762 IC Interface.