Jeppesen JeppView 3 - Manual (Page 119)

JeppView User's Guide
122
1. Open the Properties dialog box by doing either of the following:
• Right-click the waypoint in the Enroute Charts view or RoutePack List
and select Properties.
• Click Edit > User-Defined Waypoints, select the desired waypoint in
the User-Defined Waypoint dialog box, and click Properties.
2. Change any of the fields in the waypoint Properties dialog box, and then
click OK.
To change only the location of a waypoint, select it on the enroute chart and drag it
to a new location.
To unlock a waypoint, clear the Locked check box in the waypoint Properties dialog
box.
Showing and Hiding User-Defined Waypoints
To show or hide user-defined waypoints on the enroute chart:
1. Right-click an open area on the Enroute Charts View and choose Properties.
2. Click the Chart Preferences tab.
3. Click the plus sign (+) to expand the Nav Data category.
4. Select or clear the User Waypoints check box to show or hide user-defined
waypoints on the Enroute Charts view.
Changing the Default Icon
The default waypoint icon setting automatically assigns an icon to every new user-
defined waypoint. Like any other waypoint property, the icon can be modified or the
default setting changed in the User-Defined Waypoints dialog box.
To change the default icon for user-defined waypoints, do either of the following:
• Click Tools > Set Default User-Defined Waypoint, select the desired icon
in the Select Default Icon dialog box, and then click OK.
• Click Edit > User-Defined Waypoints and then click Set Default Icon.
Select the desired icon in the User-Defined Waypoint dialog box, click OK,
and then click Close.
Deleting a User-Defined Waypoint
You can delete user-defined waypoints. You must unlock a waypoint before you can
delete it (see
Modifying a User-Defined Waypoint ).
• Select the waypoint on the enroute chart and press the DELETE key.
• Select the waypoint, right-click it, and then choose Delete.
• Click Edit > User-Defined Waypoints, select the waypoint from the list,
and then click Delete.