Jeppesen JeppView 3 - Manual (Page 182)

RoutePacks and Route Planning
185
This method creates only a RoutePack, not the first route in a RoutePack. This
procedure is useful for creating a RoutePack that contains only an Other Charts
folder of frequently used charts (see
Adding Other Charts to a RoutePack ).
To create a RoutePack using the RoutePack Properties dialog box:
1. Open the RoutePack Properties dialog box by doing any of the following:
• Right-click an open space in the RoutePack List window and choose
Add RoutePack.
• Right-click an open space in the Enroute Charts View and choose New
RoutePack.
• Click File > Add RoutePack.
The RoutePack Properties dialog box contains information about the
RoutePack, including the number of routes, alternate airports, waypoints, and
length.
2. Enter a name for the new RoutePack in the Name field (or retain the default
name).
3. Click OK.
The new RoutePack appears in the RoutePack List.
Creating a Route
A route is a collection of waypoints . At a minimum, a route contains a departure and
destination airport, but it may also include enroute waypoints and alternate routes.