Jeppesen JeppView 3 - Manual (Page 38)

Installation and Activation
41
8. Specify the network drive that contains the server JeppView3 executable.
(Z:\, where Z is the network drive). This location is on the server and not on
the local machine.
9. Click Next to complete the installation.
10. Repeat steps 2 through 8 for each client.
Initial Server Installation
Insert the JeppView program disc into the CD-ROM drive on your server. The
installer will guide you through the following steps and procedures:
1. In the JeppView Welcome screen, click Next.
2. Read the information in the Installation Overview window and click Next.
3. Accept the terms of the license agreements, and then click Next.
4. Enter your registration information and 16-character or alphanumeric number
that came with JeppView, and then click Next.
5. Select the JeppView check box only and click Next. Follow the guidelines on
the screen.
6. Select the path in which to install JeppView and click Next. Jeppesen
recommends that you use the default folder or a location where other
Jeppesen programs have previously been installed. If you want to use a
different drive or folder, click Browse, and then type the path or browse to
the folder that you want.
7. Click Next on the remaining windows accepting the default entries.
8. After the update is complete, insert ECD Disc 1.
Installing Electronic Chart Data Disc 1 on a Server
Jeppesen terminal chart data is provided on ECD Disc 1. The on-screen instructions
are similar to those for the program installer, and will guide you through the setup:
1. Click Next after the Welcome screen appears.
2. Check the coverage regions listed in the installation Setup dialog box. If you
received coverage codes from Jeppesen Customer Support for additional
regions, enter them in the field below the list box. When you are finished,
click Next.
3. After the update is complete, continue with the Installing Electronic Chart
Data Disc 2 on a Server to update your enroute data and any program
updates that might be available.
If you did not receive a serial number or coverage code, please contact Jeppesen
Customer Service .
Installing Electronic Chart Data Disc 2 on a Server