Jeppesen JeppView 3 - Manual (Page 197)

JeppView User's Guide
200
Although terminal chart preferences have been set for future RoutePacks, they have
not yet been applied to the current RoutePack List. To apply these preferences to the
current RoutePack, see
Applying Chart Type Filters to Existing RoutePacks, Routes,
and Airports .
Applying Chart Type Filters to Existing RoutePacks, Routes, and
Airports
To apply terminal chart preferences to previously created RoutePacks and routes,
and to view charts for RoutePacks created in JetPlanner:
1. Right-click a RoutePack or a route in the RoutePack List to which you want to
apply the filter.
• Resetting the chart type preferences on the RoutePack resets all the
filters for any associated routes.
• Resetting the chart type preferences on the route resets all the filters
in place for the selected route only.
2. Click Reset to current Chart Type Preferences.
To apply terminal chart preferences to the departure or destination airport in a
previously created RoutePacks or route:
1. Right-click the airport to which you want to apply the filter.
2. Click Reset to Departure Chart Preferences or Reset to Destination
Chart Preferences.
The selected item now contains only the types of terminal charts selected in the
Chart Type Filter dialog box.