Cub Cadet MTD P71 Series - Manual (Page 109)

Crankshaft, piston and connecting rod
103
* - apply a small amount of releasable thread locking compound such as Loctite® 242 (blue).
** - apply a small amount of a thread sealant such as Loctite® 585
Intake manifold at carburetor and
head 62 - 80 in lbs 7 - 9 Nm
Intake manifold at head 80 - 106 in lbs 9 - 12 Nm
Intake manifold support stud 80 - 106 in lbs 9 - 12 Nm
Module 44 - 62 in lbs 5 - 7 Nm
Muffler bolts 62 - 80 in lbs 7 - 9 Nm
Oil dip stick tube bolt 80 - 106 in lbs 9 - 12 Nm
Oil slinger hold down bolt 80 - 106 in lbs 9 - 12 Nm
Rocker locking set screw 80 - 106 in lbs 9 - 12 Nm
Rocker stud 141 - 177 in lbs 16 - 20 Nm
Spark plug 177 - 221 in lbs 20 - 25 Nm
Starter (recoil) 62 - 80 in lbs 7 - 9 Nm
Sump bolts 62 - 80 in lbs 7 - 9 Nm
Thermal auto choke over ride rod 80 - 106 in lbs 9 - 12 Nm
Valve cover screws 62 - 80 in lbs 7 - 9 Nm
Fastener S.A.E. Metric