Defibtech DDU-100 Series - Manual (Page 14)

6
DAC-510E-EN-BG

WARNING
Do not attempt to recharge, short-circuit, puncture, or deform battery. Do not
expose battery to temperatures above 50°C (122°F). Remove battery when
depleted.

CAUTION
Recycle or dispose of lithium battery packs in accordance with local, state,
provincial, and/or national regulations. To avoid fire and explosion hazard, do not
burn or incinerate the battery.
2.1.3 Usage Environment

DANGER
Possible fire or explosion. Do not use in the presence of flammable gases
or anesthetics. Use care when operating this device close to oxygen sources
(such as bag-valve-mask devices or ventilator tubing). Turn off gas source or
move source away from patient during defibrillation, if necessary.

DANGER
The DDU-100 AED has not been evaluated or approved for use in hazardous
locations as defined in the National Electric Code standard. In compliance
with IEC classification the DDU-100 AED is not to be used in the presence of
flammable substance/air mixtures.

CAUTION
Do not immerse any portion of this product in water or other fluids. Do not
allow fluids to enter the device. Avoid spilling any fluids on this device or
accessories. Spilling fluids into the DDU-100 AED may damage it or present a
fire or shock hazard. Do not autoclave or gas sterilize the DDU-100 AED or its
accessories.

CAUTION
The DDU-100 AED should be stored and used only within the range of
environmental conditions specified in the technical specifications.
2.1.4 Defibrillation/Shock Delivery

WARNING
Defibrillation current can cause operator or bystander injury. Do not touch the
patient during defibrillation. Do not touch equipment connected to the patient
or metal objects in contact with the patient during defibrillation. Disconnect
other electrical equipment from the patient before defibrillating. Disconnect
the DDU-100 AED from the patient prior to use of other defibrillators.