IC Realtime 2Mp 30x Optical Zoom Full HD Network PTZ Dome Camera with 300ft IR (ICIP3001HDIR) - Manual (Page 29)

23
• BACK: Go back to the previous menu.
• EXIT: Log out the system menu.
Privacy Mask
Move the cursor to PRIVACY MASK and click confirm button, system goes to privacy mask setup
interface.
Note:
z For security reasons, please set privacy zone a little bit larger than the privacy object size.
z Each time, after modifications you need to move the cursor to SAVE button and then click confirm
button to get all setup activated. Otherwise, privacy zone may not move correspondingly with the object.
Please enter privacy mask menu, now all the privacy zones are closed.
Move the cursor to PRIVACY NO, please use left/right key to set different privacy zones.
For example, shift to 001 section and then move the cursor to ACTIVATE.
Secondly, use left/right key to select ON mode. Now there is a privacy zone in the screen centre.
Thirdly, use PTZ to move camera so that privacy object fit well with screen centre.
Fourthly, move the cursor to RESIZE and then click left and right key to adjust privacy zone direction and
size.
Fifthly, move the cursor to SAVE and then click confirm button to exit.
z PRIVACY NO ：Here is to set privacy mask zones. Please use the left/right button on the keyboard or in
the speed dome terminal menu to set.
z ACTIVATE: There are two settings: on and off. Please use the left/right button on the keyboard or in the
speed dome terminal menu to set when it is in the privacy mask area.
z RESIZE ：It is to adjust the privacy zone size. Move the cursor to current item and use the left/right
button on the keyboard or in the speed dome terminal menu to set .Please continue pressing direction
button to widen or narrow zone size. ← is to narrow the horizontal width and → is to widen the
horizontal width. ↑ is to widen vertical height and ↓ is to narrow the vertical height.
z SAVE ：Here is to save user setup.
z DELETE: Here is to delete setup and restore default setting. Click the confirm button to set.
z BACK: Go back to previous menu.
z EXIT: Log out system menu.
Power Up
Move the cursor to the POWER UP item and then click the confirm button, you can go to the fourth
menu.
PRIVACY NO ：001
ACTIVATE : OFF
RESIZE : ↑
DELETE
SAVE
BACK
EXIT