Important safeguards and warnings – IC Realtime 2Mp 30x Optical Zoom Full HD Network PTZ Dome Camera with 300ft IR (ICIP3001HDIR) User Manual
Page 5
iv
Important Safeguards and Warnings
1
．Electrical safety
z
All installation and operation here should conform to your local electrical safety codes.
z
We assume no liability or responsibility for all the fires or electrical shock caused by improper handling
or installation.
z
We are not liable for any problems caused by unauthorized modification or attempted repair.
2
．Transportation Security
z
No heavy stress, violent vibration or water splash are allowed during transportation, storage and
installation.
z
Please use the original packing material (or the material of the same quality) when you ship it back to
the manufacturer.
3
．Installation
z
Do not apply power to the product before completing installation.
z
Do not put object on the product.
4
．Environment
z
This series product should be installed in a cool, dry place away from direct sunlight, inflammable,
explosive substances and etc.
z
Please keep it away from the electromagnetic radiation object and environment.
z
Please keep the sound ventilation.
z
Do not allow the water and other liquid falling into the device. This series product complies with the IP66
standard specified in the Degrees of Protection Provided by Enclosure.
z
Please make sure the CCD (CMOS) component is out of the radiation of the laser beam device.
Otherwise it may result in CCD (CMOS) optical component damage.
5. Daily Maintenance
z
Current series product has no power button. Please unplug all corresponding power cables before your
begin installation or daily maintenance work.
z
Please keep the dustproof cap back to protect the CCD or CMOS part if the device does not work for a
long time.
z
Do not touch CCD (CMOS) component. You can use the blower to clean the dust on the surface of the
device. You can use the dry cloth with some alcohol or mild detergent to clear if necessary.
z
Do not use the volatility solvent such as the benzene or thinner, or detergent with strong abradibility. It
may result in lens damage or it may adversely affect the device performance.
z
If there is too much dust, please use the water to dilute the mild detergent first and then use it to clean
the device. Finally use the dry cloth to clean the device.
6. About Accessories
Always use all the accessories recommended by manufacturer.