Event monitoring – Keri Systems Doors.NET Manual User Manual
Page 404
Doors.NET Reference Manual
- 404 -
Event Monitoring
The Doors.NET software was designed to support both monitored and autonomous con-
figurations. A system is considered to be monitored when there is an operator viewing
events in real time - or responding to events as they happen. For example, a
can be configured to occur if a controller goes offline, if someone tries to access a door
that they don't have access rights to, or if a door is detected as being forced, or held
open.
Configuring
for the most critical of events means an operator does not have
to be watching the screen at all times. Event types can also be configured to generate
recorded video clips - an example here might be to create a 20 second video clip when a
door forced event happens at a certain reader.
The free version of the Doors.NET software also provides a feature that will auto-
matically email a message notification (or the message can be sent automatically via
SMS). See
for setup instructions and details.