Longshine LCS-WA3-50 - Manual (Page 25)

Wireless 11n Access Point
24
3.2.5 WDS Settings
When you use this device as WDS or AP+WDS mode, “WDS Setting” function can be operated.
Wireless Distribution System allows the AP to communicate with other APs wirelessly. To make it
work, you must ensure that these APs and the Router are in the same channel. Please add these
APs MAC address and comment values into the WDS list. Don’t Forget to Enable the WDS by
click the check box of “Enable WDS” and press “Apply Changes” button to save. To Delete the AP
on the list, Click the check box in the select item and click the “Delete Selected”. If you want to
delete all APs on the list, click “Delete All” to remove all of them.
Items Information
MAC Address &
Comment
Fill in the MAC address that you wish to control, and give a
definition to it.
Data Rate
The transmit limitation of data packets of this wireless AP. The
wireless AP will use the highest possible selected transmission rate
to transmit the data packets.
Current WDS AP List
Lists the WDS Settings you have added before. Click on the list to
change configuration. To Delete the station on the list, mark the
check box in the select item and click the “Delete Selected”. If you
want to delete all stations on the list, click “Delete All” to remove all
of them.
3.2.6 Site
Survey
This page shows available wireless network information. When you use this device as a client
station (STA), you may connect to other AP or Router. Select one of the lists in the site survey