Longshine LCS-WA3-50 - Manual (Page 28)

Wireless 11n Access Point
27
Items Information
IP Address The IP of your AP LAN port (default 192.168.1.254).
Subnet Mask
Subnet Mask of you LAN (default 255.255.255.0). All devices on the
network must have the same subnet mask to communicate on the
network.
Default Gateway Enter the IP Address of the AP in your network.
DHCP
DHCP stands for Dynamic Host Configuration Protocol. It is a
protocol for assigning dynamic IP addresses “automatically”. In this
device, manual setting up your client IP is necessary when you want
to use the AP as your client’s default gateway.
Please click on the Apply Changes button or the Reset button
at the bottom to save/reset the configurations.
3.4 Statistics
This page allows users to get information of data transferring condition, and monitor the status
and performance of this AP including receiving and sending packets. To see the latest report, click
button.