Longshine LCS-WA3-50 - Manual (Page 29)

Wireless 11n Access Point
28
3.5 System Log
This System Log page shows the information of the current activities on the AP. To enable system
log function:
1. Mark the “Enable Log” checkbox.
2. To see all information of the system, select the “system all” checkbox.
To see wireless information only, select the “wireless” checkbox.
To send the log information to a certain note, select the “Enable Remote Log” checkbox and
fill in the IP address in the “Log Server IP Address” box.
3. Click the button to activate. You could also click the button to
refresh the log information or click the button to clean the log table.